Title : Strait-Line 6041101CD LL120 3/16-Inch at 20-Feet Manual Level Interior Line LaserDescription : Get it straight with this advanced-technology electronic laser level. The Strait-Line Laser Level 120 is great for home improvement projects, hanging pictures and window treatments, mounting shelving, laying wall and floor tile, and more. Its laser beam is 4 times stronger for better line visibility even in brightly lit areas while its 360° rotation creates an expansive 120’ work area. Other features: adhesive mounting strips for hands-free work and damage-free removal; dual-bubble vials for easy, accurate horizontal and vertical reads; distance-control pivot for adjusting line length and visibility; adjustable laser line length to 60’; and 8° tilt. Imported.Here's a laser level perfect for the homeowner or contractor who's hanging cabinets or shelving, installing suspended ceiling or flooring or just hanging artwork. It's compact, inexpensive and reliable. Strait-Line's 60-foot laser line can mark a 120-foot work area by swiveling the laser, and it's accurate to +/- 3/16" at 20 feet. Best of all, it leaves not a mark on your surface, unlike other laser levels we've seen that have pins on the back. Instead, just peel the strip of 3M Command Adhesive (be sure to affix the correct side to each surface) and place the level. For a horizontal line, just turn the unit until the bubble in the horizontal level is between the two lines. For a vertical line, keep your eye on the vertical level's bubble. Lengthening the line is a snap, accomplished just by changing the tilt angle on the mounting base up to 4 degrees. At its full length, the line isn't as bright as when it's projecting just a few feet, but even so, it's bright enough to work from. Hanging a wall border around a corner? No problem: The laser will round the bend for you. It's slick, fast, easy and fun. Our only complaints: It only comes with four Command Adhesive strips (so stock up) and the two AA batteries are not included. Other than that, it's a great little tool.--Kris Jensen-Van Heste
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review
for another people.
1st Customer Review : Excellent Value : Does what it's designed to 100%
I pointed out a few things that were not right with and could be improved upon when I reviewed the Black&Decker BDL110S BullsEye Laser level Stud Sensor and it was refresing to find this little wonder that seems to have gotten everything right compared to the overpriced Black&Decker tool.
For starters, it's not a combo, there is no stud finder in it, so it's not bulky and it can fire the laser at any angle that you choose in addition to the obvious horizontal and vertical angles. It has bubble vials for both level & plumb. The laser can be adjusted for distance either short and bright or long with a slight loss in brightness, if you are close to the corner, it will even get the laser straight line onto the adjacent wall.
This little gadget rocks.
Click here to read the full review for more information about this product.
2nd Customer Review : STRAIT-LINE LASER LEVEL
I have used this a few times and have been pleased with its operation. I like the use of the 3M COmmand Strips to mount it. They work great. Only four are included in the package, so you'll need to buy more. I have used this outside during the daytime while putting up a fence and the laser was bright enough to see for 20-40 feet. Inside, it's very bright.
3rd Customer Review : Too much time to setup for inaccurate results.
I am a precision freak when I build things or hang things, so I got this for only $14 at my local Menards. I needed to hang a span of pictures across a wall.
I made two pre-leveled marks on the wall, then lined up this laser line's "zero marks" with my marks. I also eye-balled the bubble in the Strait-Line for level (there is a lot of room for error though). I turn on the laser and it seems to be O.K., but I can tell just by looking at it that the laser is not level. Just to double-check, I place my other standard bubble level on the line and correctly verify that the laser is NOT level. It turns out that within 2-4 ft. from the Strait-Line the laser is true. The farther out you go the less true it becomes. It stands to reason that if you are 1 degree off at the device, you will be way off 15 ft. away.
Also, the laser line particles themselves tend to broaden out farther away from the device. A laser line that is 1/64" wide at the start is a 1/4" wide farther...
Product Features :
- Manual laser level; accurate to 3/16-inch at 20-feet; mounts with no damage with 3M Command Strips
- Rotates 360-degrees; 120-foot combined range; dual bubbles vials for horizontal, vertical layout
- Durable plastic housing
- Includes laser level and 4 adhesive strips; 2 AA batteries not included
- 3-5/8-inches diameter on base; 3-1/4-inches high; 5-year warranty
Rating : 3.8
List Price : $48.80
0 comments:
Post a Comment