Title : Oshlun LG-R01 Radial Arm Saw Laser GuideDescription : Oshlun LG-R01 Radial Arm Saw Laser Guide Oshlun's new 2nd generation laser guide is the easiest and best way to turn your saw into a precision cutting machine. Installation is fast and easy, simply replace the outer blade flange with the laser unit. There are no confusing parts or adjustments. The laser guide provides a brighter, more accurate line on the left of the saw blade kerf and improves safety by showing you where the blade will cut. The centrifugal switch activates the laser automatically. Notes: If your saw has a 5/8-Inch threaded arbor shaft and uses a nut to secure the blade, this laser guide should fit. Will not fit some 12-Inch saws that have interlocking arbor flanges, including Rigid and ProTech.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review
for another people.
1st Customer Review : Double laser guide
I bought two of these for my Craftsman 10" radial arm saw. I replaced both the inner and outer arbor washers with the laser guides.....now I have a sharp, double laser line allowing easy setup on either side of the blade.
In order to use two laser guides, you will need to make sure your arbor shaft is long enough. If it can handle dado blades, it most likely is long enough. In this configuration, you will also need to make sure the blade clears the blade guard as the laser guide is most likely slightly thicker than the inner arbor washer. Be sure to check with the manufacturer of your saw for safety guidance.
Click here to read the full review for more information about this product.
2nd Customer Review : Works Great
Purchased this item for my Radial Arm Saw, not sure if there is any difference between this any other Miter Saw Arbor Laser version. Works great. With the laser directly over the line, the cut leaves/shaves the line. Easy to account for. The laser is bright enough to be easily seen in a well lit workshop. Exactly what I needed to cut my new stair treads. I have no basis for comparison to other models. This was the cheapest one on Amazon, and the only one I saw that specifically mentioned radial arm saws.
3rd Customer Review : I like this guide
This guide is really handy for checking alignment. It seems a lot more accurate than dragging the blade along a square edge. It's really nice for cutting odd angles -- just align the beam with your pencil mark and you'll be dead on.
Product Features :
- Fits most radial arm saws and saws with a threaded 5/8-Inch arbor shaft
- New recessed laser design to protect the laser from hitting the material on deep cuts
- New thinner design to fit more saws
- New brighter and more accurate laser line
- Includes extra set of silver oxide batteries
Rating : 4.4
List Price : $24.99
0 comments:
Post a Comment