Title : Infiniter Rs-1 Laser Cutting GuideDescription : Take the guesswork out of lining up accurate cuts. The Infiniter RS-1 works on the centrifugal force of the powered blade to shoot a clear, precise beam across the workpiece. Easy to install: simply replace saws outer blade washer with the laser guide. High-quality laser module and electrical components for long-lasting precision.The Infiniter RS-1 does not fit the following 12in. Miter Saws produced before 2005: Ridgid, Pro-Tech, Makita LS1221, and Dewalt DW705S. Also does not fit the following Circular Saw styles: Porter Cable Quick-Change, all worm drives, and Skill. Blade Use: Cutting guide
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review
for another people.
1st Customer Review : Nifty laser guide retrofit
Instructions: not too much ... not too little. Just enough information to answer any questions - without having to read a book. The laser guide is made in China, but the instructions are in coherent English (not always the case), and the illustrations are clear and informative. Batteries needed to be installed - no mention of that, but I cleverly figured out that if you follow the instructions for replacing the batteries, but omit the step about removing the old batteries, it works!
Workmanship: fit and finish is excellent - everything is smoothly polished, and all the pieces fit together tightly. Since this device has a centrifugal switch and must operate in a dusty environment, that counts for more than just good looks.
Installation: well, inasmuch as I was changing the miter saw blade, anyway, the installation was a snap and no extra work whatsoever. Just a matter of substituting the laser guide for the standard outer washer that rests against the saw blade...
Click here to read the full review for more information about this product.
2nd Customer Review : FANTASTIC !
At first I thought a product like this was needless overkill. After having installed it on my Bosch sliding compound miter saw, I couldn't have been more wrong. First, it's allowed me to finally true up the saw blade to the fence with a degree of accuracy I've never had before. Second, when I make a cut it is precise beyond anything I've been able to do in the past. I'm not a professional by any means. If I were, maybe I would not need this, but I'll take all the help I can get. I agree with everything the previous reviewer wrote. Rockler Woodworking sells these for only $19.99, so you may want to check there. I am so pleased with this product it almost makes me want to buy another saw just so I can install one of these on it. TW- Wheaton, IL
3rd Customer Review : Simple and effective
I added this to my 10" Hitachi miter saw in about 5 minutes. Nothing much to do - unscrew back, add included batteries, replace washer on the left of the blade with the RS-1. I've posted a picture of the unit when I first started it up.
I purchased this on Amazon for $14.95, but it is listed under a slightly different description at $21 on Amazon. I think this may cause some confusion, since the specs are not stated for this particular listing ... anyway here they are:
1. This product is the Infiniter RS-1 (I've posted pictures of the unopened carton)
2. It fits 5/8" arbor with squared end and internal threading (most saws, particularly at the lower end like mine)
3. It is activated on/off by centrifugal force (turns on when the blade is spinning)
4. The insides are very simple -- a laser, 3 batteries, centrifugal switch, and small board (I've posted a picture of the inside of the unit)
5. When you take off the washer that came with...
Product Features :
- Fits most 7-1/4", 8", 10" and 12" miter/chop/cutoff and hand held circular saws.
- Powered by three alkaline batteries (included). Easy to install and use!
- Lightweight (2.12 oz) portable features make for easy installation and operation.
- Produces a bright(30 feet), easy-to-see line for dead-on accurate cuts.
- Ideal for most large-field cutting applications.
Rating : 4.1
List Price : $49.00
1 comments:
Laserbox Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info.
Post a Comment