Title : DEWALT DW089K Self Leveling 3 Beam Line Laser, BlackDescription : The DEWALT DW089k Line Laser features multiple design enhancements to improve productivity on the jobsite. The DW089K is ideal for professionals tasked with residential and commercial applications such as installing cabinets, drop ceilings, chair rails or doors and windows. Unlike many line lasers on the market, the DW089K features a second plumb line that forms a 90-Degree intersecting line on the floor and ceiling. This third vertical beam allows contractors to use the tool for layout applications without the need for a second laser, saving time and allowing users to be as productive as possible. For commercial wall layout applications, the DW089K has a track clearance of over 1-3/4-Inch, which means there is no need for additional accessories to raise the laser over drywall track. This Line Laser also has a micro adjust knob for easy alignment, a metal roll cage for durability, and an integrated pivot bracket and universal wall mount that is ideal for acoustical ceiling installation. The micro adjust knob is especially important in that it allows users to steadily adjust the 90-Degree layout lines in small increments without the need to nudge the laser to hit a specific mark. For improved visibility, the beam on the DW089K is two-times brighter than the beam on DEWALT's current line laser. The brighter beam provides increased visibility over long distances as well as in direct sunlight. Accurate within 1/8 of an inch at 30-Feet, the DW089K allows contractors to feel confident in their results when using this product. To alleviate the difficulty professionals often experience when they try to access control panels on the rear of existing units.
Improve productivity and consistency on the job site with the DEWALT DW089K self-leveling three-beam line laser. Ideal for professionals tasked with residential and commercial applications such as installing cabinets, drop ceilings, chair rails or doors and windows, the DW089K can also be used when installing floor and wall tile or mapping wall layout.
(view larger).
|
Unlike many line lasers on the market, the DW089K features a second plumb line that forms a 90-degree intersecting line on the floor and ceiling. This third vertical beam allows contractors to use the tool for layout applications without the need for a second laser, saving time and allowing users to be as productive as possible.
For commercial wall layout applications, the DW089K has a track clearance of over 1-3/4-Inch, which means there is no need for additional accessories to raise the laser over drywall track. It's accurate within 1/8 of an inch at 30 feet.
This line laser also has a micro adjust knob for easy alignment, a metal roll cage for durability, and an integrated pivot bracket and universal wall mount that is ideal for acoustical ceiling installation. The micro adjust knob is especially important in that it allows users to steadily adjust the 90-degree layout lines in small increments without the need to nudge the laser to hit a specific mark.
For improved visibility, the beam on the DW089K is two-times brighter than the beam on DEWALT's current line laser. It includes individual buttons on the side control panel that operate all three beams, and it comes with a hard-sided kit box for storage and transport.
Warranty
This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.
What's in the Box
DEWALT DW089K self-leveling three-beam line laser; ceiling mount; kit box; operating instructions
 Micro adjust knob for precise alignment of 90-degree intersecting lines over greater distances (view larger). |
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review
for another people.
1st Customer Review : DeWalt DW089K Laser
I liked everything about this laser, except for the fact that the two vertical beams were not square with each other! On recieving the laser I first tested it for square using the 3,4,5 triangle (in this case, 12', 16', and 20') and found that the long leg of the triangle (which should have measured 20') was 3/16 short. Makes it kinda tough to lay out a square when the tool you are using is off by that much! It's going to go back to DeWalt for recalibration.
Click here to read the full review for more information about this product.
2nd Customer Review : Saves time, easy to use, and is sturdy enough for professionals
Unlike the Bosch GLL3-80 3 Plane Leveling-Alignment Laser, which can sit in the center of a room and paint 360-degree lines on every wall, the DEWALT DW089k works in a 90-degree layout. This means you can put it against a wall and it will throw lines on the ceiling, floor, front wall, and sidewalls. Basically, everywhere except the area behind it.
For most people, this probably isn't a problem--it just means you have a small blind spot. Unless you are working on the entire room--and don't want to move the level--I don't see a huge disadvantage. Where having 360-degrees is nice, it also comes at almost twice the cost.
For me, the DEWALT DW089k would have been a real time saver when I remodeled the bathrooms in my house, hung my 106" projector screen, and even straightened the pictures on my walls. But the important thing to note is that this level is sturdy enough to handle a real working...
3rd Customer Review : Calibration ????
Recently purchased the DeWalt DW089. Performed the field calibration accuracy test out of the box. Wow. Per DeWalt's instructions I checked the laser at 30' and found it to be off more than 1/2 an inch. Ran the test several more times and got nothing near the allowable distance of 1/8". So I took it to the DeWalt service center for service. They told me they would do a service test here (Kansas City area) and if it needed more service it would be sent to Houston, Texas. Never heard anything and I called and they said they had to order a new part.
Thought about it and decided why should I be replacing a part on a new tool so I went and picked it up (told by service center that they had actually ordered me a new laser). Called Amazon and got a replacement laser level today.
Decided to perform the field calibration accuracy test again before using on job next week. Wow. Not any better results. Actually worse. This time its out of wack 5/8" over the same exact...
Product Features :
- 3 Beam Line Laser to aid in 90-Degree layout
- 2x Brighter diode to increase visibility in bright job site conditions
- Built-in magnetic pivot bracket mounts easily on metal surfaces
- Accurate to +/- 1/8-Inch at 30-Feet for level applications
- 1-button operation and control panel for ease of use
Rating : 4.5
List Price : $568.50
0 comments:
Post a Comment